Mitutoyo SJ-301 - Page 148

5 - 50 No. 99MBB091A
■ Setting up c calculation conditions
F1 F2 F3 F4
F1 F2 F3 F4
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
CAL.
7.12
2000-01-01
 m
CARD
Ra
Rc
(
20%,12%
)
-0.3
 m
1 c1
20
N
REF.LINE
S.LEVEL
12
%
%
Rc
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
CAL.
7.12
2000-01-01
 m
CARD
Ra
Rc
(
20%,12%
)
-0.3
 m
1 c1
20
N
REF.LINE
S.LEVEL
12
%
%
Rc
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
CAL.
1.54
2000-01-01
 m
CARD
Ra
Rc
(
20%,12%
)
1.2
 m
2
<Home screen>
Parameter button
4
<c Measurement Condition Setup window>
3
<c Measurement Condition Setup window>
Calculation # button
Reference line level button
Button for the number of calculations
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
1
<Home screen>
[Parameter scroll]
F1 F2 F3 F4
F1 F2 F3 F4
Touch the [Parameter scroll] button in the Home screen one
or more times until the parameter Rc appears in the button,
for which the calculation condition is to be set.
Touch the displayed parameter button.
The c Measurement Condition Setup window will appear.
Touch the N button until the desired number of calculations
appears. Each time the button is touched, the number will
increase by one. A maximum of three calculation results can
be set.
TIP • If multiple (2 or 3) calculation results are
specified, set the reference line and section
level for each.
• Each calculation condition specified is
represented by the calculation # button (c1,
c2, c3) next to the number of calculation
(1, 2, 3) button.
• If multiple (2 or 3) calculation results are
specified, set the reference line and section
level starting with c1.
Touch the REF. LINE level button.
The c Reference Line Level Input screen will appear.