Mitutoyo SJ-301 - Page 149

5 - 51 No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
F1 F2 F3 F4
Rc Slice Level
(0 100%)
4 5 6
%
7
12
BS
AC
8 9
1 2
0 .
3
ESC
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
CAL.
7.12
2000-01-01
 m
CARD
Ra
Rc
(
20%,12%
)
-0.3
 m
1 c1
5
N
REF.LINE
S.LEVEL
12
%
%
Rc
Rc Refenence Line
(0 100%)
4 5 6
%
7
20
BS
AC
8 9
1 2
0 .
3
ESC
5
<c Reference Line Level Input screen>
Reference line level
input field
[Enter]
7
<Slice Level Input screen>
6
<c Measurement Condition Setup window>
Slice level
input field
[Enter]
S. LEVEL button
Enter the level of the reference line in the reference line level
input field, and touch the [Enter] button.
The input range is as follows:
0 to 100% (in 1% increments)
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Returns to the c Measurement Condition Setup for
window.
Touch the S. LEVEL button.
The Slice Level Input screen will appear.
Enter the slice level in the slice level input field, and touch
the [Enter] button.
The input range is as follows:
0 to 100% (at 1% increments)
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Returns to the c Measurement Condition Setup window.