5 - 55
No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
F1 F2 F3 F4
Ra
Ry
CAL.
1.83
7.1
2000-01-01
m
m
CARD
Condition
JIS1994
GAUSS
c
0.8mm
5
(AUTO)
RANGE
Rhsc Count Level
4 5 6
7
0.1
BS
AC
8 9
m
1 2
0 .
3
ESC
(0.0 999.9m)
<Count Level Input screen>
6
Title bar
5
Count level
input field
[Enter]
<HSC Measurement Condition Setup window>
Rhsc
BASE
S.LEVEL
PEAK
0.5
m
CAL.
2000-01-01
CARD
Condition
JIS1994
GAUSS
c
0.8mm
5
(AUTO)
RANGE
Ra
Rhsc
(
P,0.5m
)
****
1.54
/cm
m
<Home screen>
F1 F2 F3 F4
Enter a value in the count level input field, and touch the
[Enter] button.
The input range is as follows:
0 to 100% (in 1% increments)
0.0 to 999.9µm (in 0.1µm increments)
0 to 99999 µin (in 1µin increments)
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Returns to the HSC Measurement Condition Setup
window.
Touch the title bar in the HSC Measurement Condition Setup
window to accept the selected calculation condition.
The Home screen will be restored.
To Next Page
Loading...
