5 - 63
No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
0.5mm/s
ON
Page2/3
GO/NG
mm/inch
CUST.
mm
RANGE AUTO,ESC
RE-CAL.
Condition menu
<Home screen>
8
<Measurement Condition Setup screen>
Condition
JIS1994
GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
m
m
CARD
F1 F2 F3 F4
[Home]
Touch the [Home] button.
The Home screen restores.
● How to cancel the GO/NG judgment function
Repeatedly touch any of the parameter buttons in the GO/NG Judgment Function Setup screen until “
*
” is
displayed. The tolerance limits for the corresponding parameter will be canceled.
If a “
*
” is displayed for all the three parameter buttons, the GO/NG judgment function is not set.
<GO/NG Judgment Setup screen>
GO/NG
* *** ***
* *** ***
+NG -NG
*
RULE
AVERAGE
*** ***
ESC
To Next Page
Loading...
