Mitutoyo SJ-301 - Page 195

7 - 9 No. 99MBB091A
7. STATISTICAL PROCESSING OF MEASUREMENTS
2 <Max. Value Input screen>
 m
Statistics
(2.01 999.9m)
TOL. MAX
4 5 6
7BS
AC
8 9
1 2
0 .
3
+/-
ESC
4.00
 m
Statistics
(0.01 19.99m)
TOL. MIN
4 5 6
7BS
AC
8 9
1 2
0 .
3
+/-
ESC
2.00
3 <Statistical Condition Setup screen>
4 <Min. Value Input screen>
The minimum value input field
5 <Statistical Condition Setup screen>
[Enter]
[Enter]
The maximum value input field
Statistics
Ry
MIN
2.00
MAX
20.00
50
1.20
GO/NG
PARA.
INTER.
TOL.
NUM
ESC
[Min]
Statistics
Ry
MIN
10.00
MAX
20.00
50
1.20
GO/NG
PARA.
INTER.
TOL.
NUM
ESC
[Width]
Enter the maximum value in the input field, then touch the
[Enter] button.
Returns to the Statistical Condition Setup screen.
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Touch the [Min] button.
The Minimum Value Input screen will appear.
Enter the minimum value in the appropriate field, then touch
the [Enter] button.
Returns to the Statistical Condition Setup screen.
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Touch the [Width] button on the Statistical Condition Setup
screen.
The Cell Width Input screen will appear.