8 - 9
No. 99MBB091A
8. SAVE/READ OF MEASUREMENTS, MEASUREMENT CONDITIONS AND STATISTICAL DATA
■ Saving measurement conditions in internal memory
First select the media used as the save destination, then perform the following procedure.
Touch the [F. NAME] button in the Measurement Condition
Save screen.
The File Select window will appear.
Up to five files of measurement conditions will be
displayed in this window.
Touch the button of the file name used as the save destination.
TIP The existing file name can be modified to other
than the current one.
If this is to be done, proceed to step 3.
To overwrite an existing file without modifying
the current file name, proceed to step 5.
Touch the [RENAME] button.
The File Name Input screen will appear.
Condition SAVE
F. NAME
COND1
MEDIA
ESC
SAVE OK?
SJ
1 <Measurement Condition Save screen>
2 <File Select window>
3 <File Select window>
[F. NAME]
Condition SAVE
F.NAME
COND1
MEDIA
ESC
READ OK?
SJ
COND3
File name
COND1
COND4
COND2
COND5
RENAME
Condition SAVE
F.NAME
COND1
MEDIA
ESC
READ OK?
SJ
COND3
File name
COND1
COND4
COND2
COND5
RENAME
File name buttons
[RENAME]
To Next Page
Loading...
