No. 99MBB091A
8 - 10
6
<Measurement Condition Save screen
(save in progress)>
<Measurement Condition Save screen>
5
<File Select window>
4
<File Name Input screen>
Condition SAVE
F.NAME
COND1
MEDIA
ESC
READ OK?
SJ
COND3
File name
A1
COND4
COND2
COND5
RENAME
Title bar
Condition SAVE
F. NAME
A1
MEDIA
ESC
SAVE OK?
SJ
Condition SAVE
F. NAME
A1
MEDIA
ESC
SAVE OK?
SJ
[Enter]
COND1???
Condition SAVE
DEF/4 PQR/5 -/6
File name
(max 8 char.)
ABC/7BS
AC
A
MNO/8 YZ/9
GHI/1 STU/2
JKL/0 VWX/. ¥
*
/3
ESC
1
File name input field
To erase the file name in the input field touch the [BS] or
[AC] button on the screen.
[BS]: Each time this button is touched, each of the file name
characters will be replaced by a question mark (“?”),
one by one starting from the right.
[AC]: If this button is touched once, the entire file name will
be replaced by eight question marks (“????????”).
In the file name input field, enter a new file name of up to
eight characters, then touch the [Enter] button.
TIP For information about inputting characters refer
to section 2.2, “Outline of the Touch Panel”.
Returns to the File Name Select window.
Touch the title bar.
The File Select window will be closed.
Touch the [Enter] button.
The selected measurement conditions are saved and the
Measurement Condition Setup screen (1/2) will be
restored.
To Next Page
Loading...
