Mitutoyo SJ-301 - Page 221

8 - 21 No. 99MBB091A
8. SAVE/READ OF MEASUREMENTS, MEASUREMENT CONDITIONS AND STATISTICAL DATA
■ How to read measurement conditions with the [CONDITION READ] key
Measurement conditions can also be read from internal memory using the [CONDITION
READ] key.
If the Home screen is active, press the [CONDITION READ]
key on the Display Unit.
The File Select window will appear.
Touch the button of the file to be recalled, then touch the title
bar.
The specified measurement conditions are recalled and the
Home screen is restored.
TIP While the measurement conditions are being
read a progress bar is displayed.
TIP After the measurement conditions have been
read, the screen can be restored to its previous
condition.
To do this, bring up the File Select window
again (execute again steps 1 and 2 described
above), then touch the [UNDO] button.
F1 F2 F3 F4
F1 F2 F3 F4
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.83
7.12
2000-01-01
 m
 m
CARD
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.83
7.12
 m
 m
CARD
2000-01-01
COND3
Condition READ
COND1
COND4
COND2
COND5 UNDO
Condition JIS1994 GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
 m
 m
CARD
Condition JIS1994 PC75
c 2.5mm 5
(COND1)
(AUTO)
RANGE
Ry
Rz
CAL.
* * * *
* * * *
2000-01-01
 m
 m
CARD
<Home screen>
<Home screen>
CONDITION
READ
2
1
<File Select window>
<File Select window (recall in progress)>
[CONDITION READ] key
COND3
Condition READ
COND1
COND4
COND2
COND5 UNDO
File name buttons
Title bar
F1 F2 F3 F4
F1 F2 F3 F4