No. 99MBB091A
10 - 4
■ Nosepiece for cylinder No. 12AAA218
Used to protect and guide the Detector when measuring a cylindrical workpiece which is
smaller than the Drive/Detector unit.
● Dimensions and application example
Unit : mm (inch)
Drive unit
Nosepiece for cylinder
Support foot
φ15
(.591")
33
(1.299")
160°
Workpiece
● Attaching the nosepiece for cylinder
NOTE When attaching the nosepiece to the Drive/Detector unit, exercise care so that it
does not interfere with the Detector body.
1. Fit the Detector into the slot of the nosepiece.
2. Using the supplied Allen wrench tighten the two screws specified.
Detector
Drive unit
Nosepiece for cylinder
No.12AAA218
Screws
To Next Page
Loading...
