10 - 5
No. 99MBB091A
10. INSTALLING THE SJ-301 WITH OPTIONAL ACCESSORIES
■ Adapter for vertical application No. 12AAA219
Used to support the Drive/Detector unit for measuring a vertical groove in which the
Drive/Detector unit can not be placed.
● Dimensions and application example
Unit : mm (inch)
Drive unit
Adapter for vertical application
Workpiece
Hold down by hand
3.5 (.138")
56
(2.205")
23 (.906")
● Attaching the Adapter for vertical application
1. Put the Detector through the hole of the adapter.
2. Using the supplied Allen wrench tighten the two screws specified.
Detector
Drive unit
Adapter for vertical application
No.12AAA219
Screws
To Next Page
Loading...
