10 - 7
No. 99MBB091A
10. INSTALLING THE SJ-301 WITH OPTIONAL ACCESSORIES
■ Adapter for magnetic stand Nos. 12AAA221, 12AAA220
Used to secure the Drive/Detector unit to the magnetic stand.
This adapter is useful if there is insufficient space for the Drive/Detector unit or if the
Drive/Detector unit can not be held by hand.
● Dimensions and application example
Unit : mm (inch)
A : 8mm or 9.5mm (3/8
")
20
(.787")
17
(.669")
φA
φ23 (φ.906")
Magnetic stand
Adapter for magnetic stand
Drive/Detector unit
12 (.472")
6 (.236")
● Attaching the Adapter for magnetic stand
1. Attach the Adapter for magnetic stand to the rear of the Drive/Detector unit.
2. Using the supplied Allen wrench tighten the two screws specified.
Drive unit
Screws
Adapter for magnetic stand
No. 12AAA221 (A: 8mm)
No. 12AAA220 (A: 3/8")
φA
Detector
To Next Page
Loading...
