No. 99MBB091A
11 - 2
■ Storing the Drive/Detector unit in the Display unit
1. Open the drive unit compartment cover of the Display unit.
2. Move the drive unit fixing lever of the Display unit in the direction of arrow (1).
3. Exercise care so the stylus does not bump anything, and place the Drive/Detector unit in
the Display unit as indicated by arrow (2).
4. While pushing the Drive/Detector unit in the direction of arrow (2), lower it as indicated
by arrow (3).
5. Replace the drive unit fixing lever to the original position.
Drive/Detector unit
Drive unit compartment cover
Drive unit fixing lever
Display unit
(1)
(2)
(3)
■ Storing the touch pen in the Display unit.
Store the touch pen in the drive unit storage compartment provided in the Display unit.
Touch pen
Drive unit cover (opened)
SJ-301
Drive unit cover
To Next Page
Loading...
