3 - 13
No. 99MBB091A
3. SETTING UP THE SJ-301
■ Turning on the power with the AC adapter
IMPORTANT Avoid connecting the AC adapter to an outlet suffering from interference noise.
Although this instrument is designed to be resistant to line noise, measurement
repeatability may be degraded if the SJ-301 is connected to an outlet with signifi-
cant interference noise.
1. Confirm that the battery switch is turned on.
2. Connect the AC adapter to the outlet.
3. Connect the AC adapter cable plug to the Display unit.
Display unit
Battery switch
AC adapter connector
AC adapter cable plug
4. Press the [POWER] key.
[POWER] key
Side view of Display unit
NOTE If the AC adapter is used, auto-sleep will not function irrespective of the setup for the
auto-sleep function.To turn off the SJ-301 power, press the [POWER] key.
To Next Page
Loading...
