No. 99MBB091A
4 - 16
■ Print-previewing (zoom-in) a measured profile
An image of how the measured profile will be printed can be previewed on the screen.
Condition
JIS1994
GAUSS
c 0.8mm 5
(AUTO)
RANGE
Ra
Ry
CAL.
1.54
7.41
2000-01-01
m
m
CARD
F1 F2 F3 F4
F1 F2 F3 F4
XZ
XZ
AUTO(50K)
AUTO(50)
[Profile]
[Home]
[Zoom-in]
[Home]
[Profile]
1
<Home screen>
2
<Measured Profile screen>
<Measured Profile screen (zoom-in)>
Touch the [Profile] button on the Home screen.
The Measured Profile screen is displayed.
At this time, the display magnification is set so that the
entire measured profile can be displayed on the screen.
Touch the [Zoom-in] button.
The measured profile zoomed in according to the print
magnification is displayed.
TIP Touching the [Home] button restores the Home
screen.
TIP • The display magnification (Z and X) can be
changed. Refer to the following “■ Setting
the display magnification (vertical and
horizontal) of a measured profile”.
• The measured profile that has been zoomed
in can be scrolled. Refer to the following
“■ Scrolling the measured profile”.
• Touch the [Profile] button to return to the
normal profile display.
• Touch the [Home] button to return to the
Home screen.
To Next Page
Loading...
