4 - 21
No. 99MBB091A
4. MEASUREMENT OPERATION
P1 P2
X=0.56mm Z=0.25m
P2
X=0.56mm Z=0.25m
P2
X=0.73mm Z=1.0m
AUTO(20K)
AUTO(50)
5
6
4
[Move Right]
[Move Left]
[P1 P2]
Marks indicating the
two cursors are movable
AUTO(20K)
AUTO(50)
[Move Right]
[Move Left]
Mark indicating the cursor (P2)
is movable
<Measured Profile screen (ruler function)>
AUTO(20K)
AUTO(50)
[P2]
<Measured Profile screen (ruler function)>
<Measured Profile screen (ruler function)>
<Measured Profile screen (ruler function)>
P1 P2
X=0.56mm Z=0.1m
AUTO(20K)
AUTO(50)
Touch the [Move Right] button to move the cursor (P2) right.
TIP • The [Move Left] button can also be used.
• Holding the [Move Right] or [Move Left]
button touched will increase the moving rate
of the cursor (P2).
Touch the [P2] button.
The icon on the button changes to [P1 P2], allowing both
cursor (P1) and cursor (P2) to be moved.
Touch the [Move Right] button to move the cursor (P1) and
cursor (P2) right.
TIP • The [Move Left] button can also be used.
• Holding the [Move Right] or [Move Left]
button touched will increase the moving rate
of the cursor (P1) and cursor (P2).
To Next Page
Loading...
