No. 99MBB091A
4 - 20
● Ruler display procedure
P1
X=0.00mm Z=0.0m
AUTO(20K)
AUTO(50)
P1
X=0.73mm Z=1.0m
P1
X=0.00mm Z=0.0m
AUTO(20K)
AUTO(50)
AUTO(20K)
AUTO(50)
[Display Ruler]
Ruler function icons
[Move Right]
[P1]
[Move Left]
1
3
2
Mark indicating the cursor (P1)
is movable
<Measured Profile screen (zoom-in)>
<Measured Profile screen (ruler function)>
<Measured Profile screen (ruler function)>
<Measured Profile screen (ruler function)>
AUTO(20K)
AUTO(50)
XZ
XZ
Touch the [Display Ruler] button in the Measured Profile
screen (zoom-in).
The ruler function icons are displayed on the bottom of the
screen.
Touch the [Move Right] button to move the cursor (P1) right.
TIP • The [Move Left] button can also be used.
• Holding the [Move Right] or [Move Left]
button touched will increase the moving rate
of the cursor (P1).
Touch the [P1] button.
The icon on the button changes to [P2], allowing the
cursor (P2) to be moved.
To Next Page
Loading...
