The USB AIM is not connected.
The USB AIM is connected but not operational. Hover over the
icon to learn additional details about the problem.
USB AIM Device Information
Retrieve details about your USB Audio Interface Module (USB AIM) device using the USB AIM Device
Information window in the Peripheral Configuration Tool application.
The window contains the following information:
• Firmware version
• Kit number
• Tanapa number
Accessing the USB-AIM Device Information
In the main menu of the Peripheral Configuration Tool application, click File → USB AIM Device
Information.
NOTICE: If the Peripheral Configuration Tool cannot access the information about the USB
AIM, an error appears in the USB AIM Device Information window. If you encounter this
issue, close the window and unplug the USB cable from the USB AIM and from the MCC
7100 IP Dispatch Console computer. Wait a while, plug the cable in, and reopen the USB
AIM Device Information window.
Copying the USB AIM Device Information
In the USB AIM Device Information window, click Copy to clipboard.
MN000672A01-E
Chapter 5: Console Dispatch Status and Peripheral Configuration Tool
140 Send Feedback
To Next Page
Loading...