3 Generate License Certificates for the MCC 7100 IP Dispatch Console. See Generating License
Certificates for the MCC 7100 IP Dispatch Console on page 50.
4 Optional: Install third-party or cohab software. See Third-Party or Cohab Software Installation on
page 61.
5 Install the MCC 7100 IP Dispatch Console software. See Installing the MCC 7100 IP Dispatch
Console Software on page 52.
6 Apply Windows Supplemental Configuration. See Applying the Windows Supplemental
Configuration on page 61.
7
Configure Provisioning Manager for Consoles. See “Console Configuration in Provisioning
Manager” in the MCC 7500 Dispatch Console with VPM manual.
NOTICE: Perform this step after Zone and Console Site objects have been configured.
8 Setup the peripherals. See Peripheral Configuration on page 63.
9 Setup the network. See Setting Up the Network on page 65.
10 Optional: Load secure keys and Algorithms. See Load Secure Keys and Algorithms on page
55.
11 Start Elite Admin. See “Starting Elite Admin” in the MCC 7500/7100 Elite Admin User’s Guide
manual.
12 Create a desired *.elt file. See “Creating a New Configuration” in the MCC 7500/7100 Elite
Admin User’s Guide manual.
13 Start Dispatch. See “Starting Elite Dispatch” in the MCC 7500/7100 Elite Dispatch User's Guide
manual.
14 Verify Call Functionality. See “Communicating with Radios” in the MCC 7500/7100 Elite
Dispatch User's Guide manual.
Installing the .NET Framework 3.5 Outside the ASTRO RNI
Perform this procedure only if you use Windows 8 operating system. Windows 8 operating system
comes with the .NET Framework, version 4.5. The MCC 7100 IP Dispatch Console software requires
the .NET Framework, version 3.5.
Prerequisites: Locate the installation media form which you installed Windows 8 operating system.
The installation media can be a DVD-ROM or an ISO Image.
Procedure:
1 Open the command prompt window as an administrator.
For more information, see the Windows Help and Support online help.
2 To install the .NET Framework 3.5 from the \sources\sxs folder on the installation media, run
the following command: DISM /Online /Enable-Feature /FeatureName:NetFx3 /
All /LimitAccess /
Source: <.Net Framework 3.5 files location>
where <.Net Framework 3.5 files location> is the full path to the .NET files necessary
to restore the feature, for example, d:\sources\sxs
Upgrading an Existing MCC 7100 IP Dispatch Console
Follow this procedure for a new installation of the MCC IP Dispatch Console in the ASTRO
®
25 Radio
Network Infrastructure (RNI).
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
44 Send Feedback
To Next Page
Loading...
Need help?
General