4 Right-click the location of the Proxy Server, for example nmd1.zone1 and select New Host.
5 In the Name field, enter the remote console ASTRO
®
25 RNI hostname.
6 In the IP address field, enter the remote console ASTRO
®
25 RNI IP address.
NOTICE: For example, z001s001op01.nmd1.zone1, and 10.1.1.1. This address
should correspond to the hostname of the remote console combined with the ASTRO
®
25
RNI suffix configured during the installation or in the Console Dispatch Status, for
example myOP.CENsuffix.nmd1.zone1.
7 Select the Create Associated Pointer (PTR) Record check box.
8 Click OK.
9 Click Done.
Hardware Crypto Configuration
Configuring the crypto hardware includes:
•
Changing the Default CRYPTR micro Password
• CRYPTR micro Software Upgrade
Changing the Default CRYPTR micro Password
To change the CRYPTR micro officer (administrative) and user passwords, use the CRYPTR micro
Management application.
When and where to use: After an installation or upgrade, reset the passwords to the default values
and change them before running Elite Dispatch and processing secure calls.
Procedure:
1 Navigate to C:\Program Files (x86)\Motorola\Motorola CRYPTR micro Support
Applications\.
2 Right-click CRYPTRManagement and select Run As Administrator.
NOTICE: Running as Administrator is required only when changing the officer/user
passwords and is not required to use other functionality provided by the Management
application.
3 In the Application Configuration screen, from the pull down menu, select SDIO. Click OK.
4 From the main screen, choose Login Admin to change the Office password, or Login User to
change the user password.
5 Where prompted, enter the default password. Click OK.
6 Where prompted, enter the default password again along with the new password.
7 Click OK.
Upgrading the CRYPTR micro Software Upgrade
The CRYPTR micro software can be upgraded during MCC 7100 IP Dispatch Console software
installation or upgrade.
In this case, the CRYPTR micro upgrade is silent and does not require user intervention. If the
CRYPTR micro device is inserted during the MCC 7100 IP Dispatch Console upgrade, it is upgraded
automatically. If it is inserted post-upgrade, it is upgraded immediately.
If the CRYPTR micro software must be upgraded on its own, not as part of the MCC 7100 IP Dispatch
Console upgrade, use the CRYPTRManagement application:
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
70 Send Feedback