MCC 7100 IP Dispatch Console
System Components
ASTRO
®
25 System Release 7.13 Requirements
Console Site Router You must update the ASTRO 7.13 console site router con-
figuration.
Setting Up the MCC 7100 IP Dispatch Console in a System From
a Previous ASTRO 25 Release
Prerequisites: Before you install any application or operating system software, audit each dispatch
console to determine which version of the system release is installed.
• MCC 7100 IP Dispatch Consoles released in ASTRO
®
25 7.14 are backward compatible with
ASTRO
®
25 7.11 and ASTRO
®
25 7.13 systems.
• MCC 7100 IP Dispatch Consoles released in ASTRO
®
25 7.15 are backward compatible with
ASTRO
®
25 7.13 and ASTRO
®
25 7.14 systems.
When and where to use: Use this procedure to prepare your ASTRO
®
25 system for installation of the
MCC 7100 IP Dispatch Console.
Procedure:
1 Obtain updated configuration files for all the following devices:
• Console site LAN switch – see the System LAN Switch manual.
• Site routers - see the System Gateways – GGM 8000 manual or the System Routers –
S6000/S2500 manual.
• Zone Core Protection (ZCP) firewall - see the Fortinet Firewall manual.
• Control room firewall if present in your system - see the Fortinet Firewall manual.
2 Update the Group Policies Objects (GPO) on the domain controllers for the MCC 7100 IP
Dispatch Consoles. See the Authentication Services manual.
3 Set up the MCC 7100 IP Dispatch Console in Provisioning Manager to ensure the console
authentication with the Lightweight Directory Access Protocol (LDAP) database.
4 Install the PRX 7000 Console Proxy. See Setting Up the PRX 7000 Console Proxy on page 89.
• In an ASTRO
®
25 7.15 system, you can install the PRX 7000 Console Proxy on a dedicated
standalone client running Windows 7 or cohabited with the one of the following applications:
• ASTRO
®
25 7.17 MCC 7500 Dispatch Console
• ASTRO
®
25 7.15 or ASTRO
®
25 7.17 Console Alias Manager (CAM) client
•
• When you install the ASTRO
®
25 7.15 PRX 7000 Console Proxy application on an ASTRO
®
25 7.13 system, it must use the ASTRO
®
25 7.13 version of the windows supplemental
configuration (secure) kit.
• When you install the ASTRO
®
25 7.15 PRX 7000 Console Proxy application on an ASTRO
®
25 7.13 system, it can use the ASTRO
®
25 System Release 7.13 version of the antivirus
software.
5 Install the MCC 7100 IP Dispatch Console (and anti-virus software). See Setting Up the MCC
7100 IP Dispatch Console on page 42.
6
Update the Customer Enterprise Network (CEN) to support the MCC 7100 IP Dispatch Consoles
outside the ASTRO
®
25 Radio Network Infrastructure (RNI).
MN000672A01-E
Appendix C: MCC 7100 IP Dispatch Console System Release Compatibility
166 Send Feedback
To Next Page
Loading...
Need help?
General