Motorola solutions MCC 7100 IP - Setting Up the Domain for the PRX 7000 Console Proxy

10 Right-click Local Area Connection and select Properties.
11 Double-click Internet Protocol (TCP/IPv4) and set the following values:
a Select Use the Following IP address: in the General tab.
b Enter the IP address, Subnet mask, and Default gateway provided for this network
interface card.
c Select Use the following DNS server addresses:.
d To open the Advanced TCP/IP Settings, click Advanced window.
e Select the DNS tab.
f Click Add..., enter the DNS server address in the TCP/IP DNS Server window, and click
Add to save the address.
NOTICE: Repeat this step for each DNS server in the order of use.
g Select Append these DNS suffixes (in order):.
h Under the list of DNS suffixes, click Add.... In the TCP/IP Domain Suffix window, enter the
Domain suffix, and click Add to save the suffix.
i Check Register this connection's addresses in DNS.
j Select the WINS tab and verify that the Enable LMHOSTS lookup check box is NOT
selected.
k Click OK on all subsequent windows to save all IP settings.
l Click No when prompt to reboot.
Setting Up the Domain for the PRX 7000 Console Proxy on L
and M Core
Perform this procedure on the server running the console proxy software inside the ASTRO
®
25 Radio
network Infrastructure (RNI).
Prerequisites:
Configure the DNS server IP addresses and DNS suffixes. See Configuring the Computer Network
Interface Card for the PRX 7000 Console Proxy on page 94.
A domain administrator account and password associated with this domain account are required to join
the Active Directory domain. For additional domain authentication information, see the Authentication
Services manual.
Apply a secure password to the Administrator account at this time. Failure to do so may result in a
security breach. Follow standard Microsoft procedures to change the password on this account.
Procedure:
1 In the Windows Operating System (OS), navigate to the PRX 7000 bin directory:
•
On a 32-bit OS: <systemdrive>\Program Files (x86)\Motorola\AAA\bin
• On a 64-bit OS: <systemdrive>\Program Files\Motorola\AAA\bin
2 Double-click JoinADomain.exe.
NOTICE: If the Active Domain (AD) cannot be found, manually enter the domain name.
3 If the User Account Control window appears, click Yes.
MN000672A01-E
Chapter 3: PRX 7000 Console Proxy Setup and Installation
Send Feedback 95