Chapter 2
MCC 7100 IP Dispatch Console Setup
and Installation
This chapter provides setup and installation procedures for all components related to the MCC 7100 IP
Dispatch Console.
MCC 7100 IP Dispatch Console Software Requirements
The MCC 7100 IP Dispatch Console requires a Windows-based computer or workstation running at
least Windows 7 Professional 64-bit operating system with an approved service pack .
Windows XP and Windows Vista operating systems are not supported.
Windows 8 64-bit operating system or Windows 8.1 64-bit operating system are supported only outside
the ASTRO
®
25 Radio Network Interface (RNI). However, if you use hardware encryption, the
CRYPTR micro requires the Windows 7 Professional 64-bit operating system with an approved service
pack.
NOTICE: Windows 7 Ultimate is supported but not required.
MCC 7100 IP Dispatch Console Hardware Requirements
The Motorola-certified HP Z420 desktop computer supports MCC 7100 IP Dispatch Console software.
The software is also supported by a provided laptop or desktop computer provided by your
organization, meeting the minimum hardware requirements in Table 9: Laptop Hardware Specifications
on page
40.
Motorola-Certified HP Z420 Hardware Specifications
The following hardware specifications are for the Motorola certified HP Z420 workstation:
NOTICE: The HP Z400 workstation does not support the MCC 7100 IP Dispatch Console
software.
Table 8: Hardware Specifications for HP Z420 Workstation
Hardware Specification
Processor Intel
®
Xeon E5-1603, 2.8 GHz,1066Mhz memory, Quad Core
Hard Drive 250 GB 7200 rpm SATA 3.0 Gb/s NCQ
Hard Disk Controller Integrated SATA controller
System Memory 4 GB total memory (2 x 2 GB DDR3 1600 MHz ECC)
LAN Integrated Intel 82579LM PCIe GbE Controller
Optical Storage 16X SuperMulti DVDRW SATA
Keyboard HP USB Standard Keyboard
Mouse Microsoft Wheel Optical 3-button USB Mouse
Table continued…
MN000672A01-E
MCC 7100 IP Dispatch Console Setup and Installation
Send Feedback 39
To Next Page
Loading...
Need help?
General