NOTICE:
By performing the following procedure, you disable the Windows operating system restore
feature. System restore has the potential to disrupt the audio of an active call when a system
restore point is initiated.
For best performance of the MCC 7100 IP Dispatch Console application, leave system restore
disabled. However, if the system restore is required, schedule it while the MCC 7100 IP
Dispatch Console application is shut down or during off hours so that it causes the least amount
of disruption to dispatch operations.
Prerequisites: Ensure that you installed any cohab applications.
Procedure:
1 Depending on the location of the console, perform one of the following actions:
• For a console inside the ASTRO
®
25 RNI in a K core system, perform the “Applying Device-
Specific Settings Using the Windows Supplemental CD” procedure from the Windows
Supplemental Configuration manual.
During this procedure, in the Device Specific Settings pane of the Windows Supplemental
CD window, select one of the following devices:
• For dispatch IP consoles, select Windows7 MCC7100 IP Consoles
• For patch IP consoles, select Windows7 MCC7100 Patch IP Consoles
• For a console outside the ASTRO
®
25 RNI that has no domain access, perform the “Applying
Device-Specific Settings Using the Windows Supplemental CD” procedure from the Windows
Supplemental Configuration manual.
During this procedure, in the Device Specific Settings pane of the Windows Supplemental
CD window, select Windows7 MCC7100 Console Operator Position Outside the RNI.
• For a console outside the ASTRO
®
25 RNI that is joined to a Customer Enterprise Network
(CEN) domain, perform the following actions:
1 Import the MCC7100 IP Consoles Outside RNI Group Policy Object (GPO). See
Importing Group Policy Objects into a Customer Enterprise Network Domain on page
62.
2 Link the MCC7100 IP Consoles Outside RNI GPO to the appropriate Organizational Unit
(OU) on the CEN domain controller.
For detailed instructions, see the appropriate documentation and contact the CEN
network administrator.
2 Optional: From Windows Supplemental CD, install the optional Event Logging Client (Syslog)
component: logging.xml.
Importing Group Policy Objects into a Customer Enterprise Network
Domain
To import MCC 7100 IP Dispatch Console Group Policy Objects (GPOs) into a Customer Enterprise
Network (CEN) domain running on the Windows Server 2008 R2 operating system, use the
PowerShell framework.
Prerequisites: Obtain the ASTRO
®
25 Windows Supplemental CD.
Procedure:
1 Insert the Windows Supplemental CD to the domain controller.
2 From the Start menu, select All Programs → Accessories → Windows PowerShell →
Windows PowerShell.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
62 Send Feedback
To Next Page
Loading...
Need help?
General