Low-Voltage Inhibit (LVI)
Low-Power Modes
MC68HC908AB32 — Rev. 1.0 Technical Data
MOTOROLA Low-Voltage Inhibit (LVI) 363
21.7 Low-Power Modes
The STOP and WAIT instructions put the MCU in low power-
consumption standby modes.
21.7.1 Wait Mode
If enabled, the LVI module remains active in wait mode. If enabled to
generate resets, the LVI module can generate a reset and bring the
MCU out of wait mode.
21.7.2 Stop Mode
If enabled in stop mode (LVISTOP set), the LVI module remains active
in stop mode. If enabled to generate resets, the LVI module can
generate a reset and bring the MCU out of stop mode.
To Next Page
Loading...
