To Next Page

To Previous Page

2-56 Services and Feature Description

6866537D87-F Chapter 2 - MTM800 Product Information Manual September 2008

16.13 Universal Time Display

The terminal is capable of presenting time information to the user. The time is derived from an

internal clock. The terminal maintains the clock both when the terminal is powered on and powered

off.

Note: In case of power loss (e.g. flat battery) the internal clock will not be maintained.

The time is received from the SwMI and is updated if the maximal deviation between time on the

internal clock and the time received is less than a value set during terminal programming via the

CPS interface.

The feature is enabled or disabled and the default configuration set for the terminal via the CPS

interface.

The terminal display supports:

• Twenty-four-hour and twelve-hour formats

• DD/MM/YY, MM/DD/YY and DD-MON-YY date formats

• Adjustable time offset

The time information can be changed by the user via MMI, if enabled in codeplug.

System broadcast information has higher priority than data entered manually. Hence time, date and

offset information entered via MMI is overwritten, when data is received from the SwMI.

The terminal provides user indications upon crossing to another time zone, when new MCC

broadcast received.

Benefits:

❏ Time displayed can be synchronized for a number of terminals

16.14 Test Page / Test Mode

Note: The Test Mode option must be enabled in the terminal via CPS programming and selecting

the “Test Page” option. The Test Mode is only for use by authorized persons, and not by users.

Use the following terminal key sequence, by pressing each button in turn, to access “Test Mode”:

• Cursor right , 1 , Menu, 2 , Menu, 3.

Note: If the Test Mode option is not enabled via CPS programming you have only access to the KVL

Mode options KVL On or KVL Off.

The following are the services offered by test page:

16.14.1 Ver info

Displays software/hardware version information:

• Build Date

• CodePlug Version

• DSP Software version

• Host Software version

• Hardware ID

Motorola MTM800 Product Information Manual

Other manuals for Motorola MTM800