3-78 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
20.1.4 Test Mode
This is a non editable field set to disabled as a factory default. It is a special RF test mode used by
Motorola engineers that disables normal terminal operation, features and functionality. If enable, the
terminal will automatically enter this mode on power up.
20.1.5 Ring Style
This field is used to set the ring style of the terminal. There are 9 available options, selectable by
clicking the pointer in the field value box, clicking on the down arrow to display the options, use the
scroll bar to scroll the options list and select an option by clicking the pointer on the required option.
20.1.6 Speaker Phone
This option defines whether or not received audio is heard through the terminals loudspeaker
instead of the terminal’s earpiece.
This feature is Enabled/Disabled by clicking in the check box.
20.1.7 Range Scroll Type
This option defines whether the terminal will continually scroll the talkgroups of all the ranges, or will
loop back within the same range and to change ranges, the user will have to manually select the
required range via the terminal’s menu functionality or pre-programmed button option.
Click the pointer on the down arrow to display the options and select an option by clicking the
pointer on the required option.
To Next Page
Loading...
