September 2008 Chapter 1 - MTM800 Product Information Manual
6866537D87-F
Chapter 1
PRODUCT OVERVIEW
1 Introduction
This Product Information Manual explains all the features, and functionality of the MTM800 TETRA-
Terminal and the Customer Programming Software (CPS) used for programming the terminal.
It describes the following:
• Available features
• The user interface
• Accessories
• Product ordering
• The Customer Programming Software (CPS)
• Connection to a PC for data operation
This manual complements the available TETRA product sales and technical training and should be
used in conjunction with the terminals on a live system. The hands on experience provides valuable
practical knowledge that can be used to help explain the benefits and use of the TETRA-Terminals
to potential end users.
1.1 Using this manual
The Customer Information Manual is divided into four chapters that cover the following topics:
Chapter 1 This chapter is a review of the Motorola TETRA-Terminal showing the user interface
and detailing the specifications of the terminal. It also provides a list of the available
accessories, model numbers and how to order the products.
Chapter 2 This chapter describes the features of the product.
Chapter 3 It is a step by step guide of the ‘Customer Programming Software’ (CPS) and explains
the available options, the settings’ range and defaults where applicable.
Chapter 4 This chapter describes the method for connecting a computer to the terminal for data
transfer.
To Next Page
Loading...
