Motorola MTM800 - 30.3 Normal Periodic Profile; 30.3.1 GPS Event Location Enable; 30.3.2 GPS event Timestamp Enable; 30.3.3 GPS Destination ISSI

3-132 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
30.3 Normal Periodic Profile
Profiles are reasons why unsolicited location reports are sent. Each Profile sub menu is used to set
the parameters that trigger the sending of the report for that particular Profile or Reason.
This profile defines the normal unsolicited location reporting of the terminal, if enabled.
30.3.1 GPS Event Location Enable
Selecting this option will enable the Unsolicited Location Report to be sent for this profile. This
profile defines the normal reporting/sending of location reports.
30.3.2 GPS event Timestamp Enable
If enabled, this option adds a timestamp to each normal report.
30.3.3 GPS Destination ISSI
This Field Value contains the destination address, ISSI, for the Location Report message.
30.3.4 GPS Unsolicited Shape
This is the ‘Shape’ used for Unsolicited Location reports. The shape can either be:
SHAPE_2d - a two dimensional position report of Latitude & Longitude.
SHAPE_3d - a three dimensional position report of Latitude, Longitude and height.
Select the Field Value option display arrow and choose the required shape.
30.3.5 GPS Unsolicited Velocity Type
There are seven options selectable by clicking on the arrow in the Field Value box. This entry
defines the type of velocity (speed) report that is sent as part of the location report. the options are:
SPEED_NON - No speed reported.
SPEED_HORIZONTAL - Gives the magnitude of the horizontal component of the velocity of a
target entity.
SPEED_HORIZONTAL_WITH_ACC - Gives the magnitude of the horizontal component of the
velocity of a target entity with accuracy.
SPEED_VERTICAL - Gives the magnitude of the vertical component of the velocity of a target
entity.