Motorola MTM800 - 18.3.12 Scan List On;Off Over the Air; 18.4 Voice Services Options; 18.4.1 Default Call Priority; 18.4.2 Transmit Demand Priority

3-68 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
18.3.12 Scan List On/Off Over the Air
If enabled the terminal is able to send its scan list to the system.
18.4 Voice Services Options
This menu has the following options:
18.4.1 Default Call Priority
This Indicates the priority level of a call (before transmission begins). This field is editable.
18.4.2 Transmit Demand Priority
There are 4 options associated with this field entry and are selected by clicking the pointer in the
field value box and selecting an option using the down arrow.
The selected entry defines the level of priority used by the terminal to send transmit requests (Group
Call or Express Group Call only).
Note: This parameter may be ignored by the system.
The available levels are:
• Low Demand Priority.
• High Demand Priority.
• Pre-emptive Demand Priority.
• Emergency Pre-emptive Demand Priority (This is priority 15 and will not interrupt emergency
calls).