Motorola MTM800 - Specific Troubleshooting Charts

3-80 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
• Side Button Locked
• Misc Locked
• PTT & Side Button Locked
• PTT & Misc Locked
• Misc & Side Button Locked
• All Locked
To select the option, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired option.
20.2.6 Group Call Received Tone
If enable the received Group Call Alert will sound.
This feature is Enabled/Disabled by clicking in the check box.
20.2.7 Talk Permit Tone Option
The 3 available options are used to define the duration of the Talk Permit Tone when the user
presses the PTT button. The tone indicates to the user that the terminal is in transmit mode and can
talk.
20.2.7.1 No Tone
Note: If this option is selected and the terminal’s ‘Talk Permission’ is delayed a number of seconds,
due to heavy system traffic (such as a large-scale emergency situation), the first part of the mes-
sage would not be sent if the user is accustomed to speaking immediately on pressing the PTT but-
ton.
20.2.7.2 Single tone
A single tone is heard upon pressing the PTT.
20.2.7.3 Normal tone
The factory-default tone heard upon pressing the PTT.
To select an option, place the pointer into the field, click on the arrow and drag the pointer to the
desired option.