EasyManua.ls Logo

Motorola MTM800 - 25.2 Private Call; 25.2.1 Name; 25.2.2 ID

Motorola MTM800
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-102 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
Examples:
If there are less than 1,000 phones in your fleet, the service provider may allow phones to address
each other using only 3 digits, and their real address will use a 'fleet address' as a base address
only if 3 digits or less are entered by the user.
If you want the user to enter exactly n digits, then set the Mode field of the nth entry to Enable. Enter
in the Base ISSI field the first digits of the terminal ISSI, followed by zeros.
Say, your terminal ISSI is 4282123. You prefer to call the engineers outside your group by dialing 3
digits (i.e.: dialing 456 to call 4282456). Therefore, set the Mode field of Entry 3 to Enable. Enter
4282000 in the Base ISSI field.
The engineers inside your group have the following numbers: 4282100 - 4282199. You wish to call
your group by dialing 2 digits. Therefore, set the Mode field of Entry 2 to Enable, and enter 4282100
in the Base ISSI field.
Thus:
dialing 89 will call 4282189
dialing 089 will call 4282089
dialing 389 will call 4282389
dialing 9 will call 4282389 (possible if the value of the Mode field of Entry 1 is Enabled)
Base ISSI 0 in the 7 entries and Mode field Enable mean that the user can enter the real TETRA
Identity, i.e. what the user types is sent over the air.
25.2 Private Call
This list contains up to 100 IDs (ISSIs) of other terminal’s on the system.
Entries can either be entered manually or a predefined list can be imported using the ‘File\Import\
User Data option’.
Note: Both the Semi-duplex Private Call and Private Duplex Call options in ‘Feature Flages’ must
be enabled, otherwise not all these feature options will be available to the user.
The list is numbered 1 to 100 and has the following three editable columns:
25.2.1 Name
This field can contain a 12 digit alphanumeric name or alias identity of the terminal/user.
25.2.2 ID
This is a terminal’s Individual Short Subscriber Identity (ISSI) of up to 8 digits in the range 0 to 9 can
be entered in this field.

Table of Contents

Other manuals for Motorola MTM800

Related product manuals