3-116 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
27.3.2 NO TE TEMTA-REPORT IND Counter Limit
This is a Service Profile timer. MT2 terminates its PPP link with TE2 and resets to zero he NO
TEMTA-REPORT IND counter when the counter reaches its maximum value.
The range of this timer is 1 to 100.
27.3.3 TE TEMTA-REPORT IND Timer
This is a Service Profile timer. MT2 uses TE TEMTA-REPORT IND timer in combination with
NO TEMTA-REPORT IND counter over limit to decide when to terminate the PPP link
The range of this timer is 1 to 300.
28 Buttons, Keys and Accessories
This menu defines:
• The type of accessory that can be used with the terminal.
• The one touch functionality of any button/key programmed with this feature.
The available options are:
28.1 Accessory
This menu has the following features:
28.1.1 Accessory Selection
This field defines the type of accessory that will be used with the terminal, the options are:
• Standard Mic
• Handset
• External Mic
• External & Std
- all transmit audio is sourced from the external connector unless a physical
PTT is invoked. The call is started or answered using the key pad, the external mic is active.
Also for Hot mic and Ambience Listening the external mic will be active.
To Next Page
Loading...
