Motorola MTM800 - 19 DMO Parameters; 19.1 DMO Emergency Options; 19.2 DMO Short Data Service; 19.2.1 DT314

DMO Parameters 3-71
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
19 DMO Parameters
Related field is:
Paragraph 14.6 "Direct Mode (DMO)"
Paragraph 14.7 "Direct Mode (DMO) Reservation"
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3 "One Touch Buttons"
This menu is used to set the parameters for Direct Mode Operation (DMO). When in DMO, the
terminal acts like a normal 2 way terminal and is not logged on to the system.
19.1 DMO Emergency Options
Emergency Alarm parameter indicates whether the emergency alarm feature is enabled or disabled
in DMO.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
19.2 DMO Short Data Service
This sub menu lists all the parameters related to the DMO Short Data Service feature.
It has the following options:
19.2.1 DT314
This entry defines time-out in miliseconds for reporting SDS failure after sending DM-PRE ACCEPT.