Contact Book 3-103
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
25.2.3 Status
Select the check box to make an entry active. If an entry is not checked, it will not be displayed. This
makes programming easier when the list is imported. Instead of manually entering the ISSIs and
leaving out the terminal’s own ID, the list can be imported and the terminal’s own ISSI can be left
unchecked.
25.2.4 Indexed
This field shows if the private number has been set up for a ‘One Touch Button’ option.
The number 2 in the column shows that the dispatcher can be called by pressing button 2 of the
keypad.
25.3 PABX List
The structure and functionality of this list is similar to the Private Call List, but only has up to 25
entries.
Note: The PABX option in ‘Feature Flages’ must be enabled, otherwise this feature will not be
available to the user.
25.3.1 Name
A 12 digit alphanumeric name or alias of the person can be entered in this field.
25.3.2 Phone Number
A number of up to 25 digits in the range 0 to 9, *, # can be entered in this field.
25.3.3 Status
Select the check box to make an entry active. If an entry is not checked, it will not be displayed. A list
can either be created manually or imported.
25.3.4 Indexed
This field shows if the private number has been set up as a ‘One Touch Button’ option.
The number 8 in the column shows that the office extension can be called by pressing button 8 of
the keypad.
To Next Page
Loading...
