TalkGroups 3-93
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
When copying DMO or TMO talkgroup list to another new codeplug, mapping will be lost. Use
cloning to keep values.
You cannot map a DMO talkgroup to an unprogrammed TMO talkgroup.
To select the correspondent DMO talkgroup, put the pointer into the field value, click on the arrow,
and drag the pointer to the desired talkgroup.
24.1.2.11 Index
This column is non editable. Whenever a talkgroup is assigned as a one touch button option, the
keypad number to which it is assigned will be displayed in this box.
24.1.3 TMO Scan Lists
This sub menu contains 40 scan lists and each list may contain up to 20 entries. The lists can have
identical entries if required.
24.1.3.1 Scan List 1
This has the following two options:
• Attributes
Name - a name or alias of up to 12 alphanumeric digits can be entered in the Field Value box
of this category.
Status - Selecting the check box in the Field Value for the Status category will make the scan
list active and selectable by user action.
• Contents
To Next Page
Loading...
