Subscriber Unit Parameters 3-39
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
13 Subscriber Unit Parameters
Selecting this menu option will display its information in the right side of the screen. Not all fields are
editable, some being information fields only.
The first 6 fields provide information about the terminal’s codeplug, software and application image
versions, its model type, number and hardware ID.
Field 7 is a copyright notice.
Equipment Temporary Disabled is non-editable.
Subscription Temporary Disabled, is editable. When a terminal has been disabled over the air
(stunned), this field will be ‘checked’. It can be unchecked over the air or via the CPS. If the terminal
is stunned it will no longer be usable on the system (TMO) or off the system (DMO).
Equipment Permanently Disabled and Subscription Permanently Disabled, are non editable
Serial Number show the terminal’s serial number
Radio TEI show the terminal’s Terminal Equipment Identity (TEI)
Radio ISSI.This is where the terminal’s own Individual Short Subscriber Identity (ISSI) is entered. It
is the terminal’s unique system ID and it acts like a normal telephone number. The ISSI can contain
numbers in the range 1 - 13999999. Without a valid ISSI the terminal will not log on to a system.
Organization. The name of the organisation where the terminal was programmed can be entered
here for reference.
To Next Page
Loading...
