3-40 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
Person. The name of the person programming the terminal can be entered in this field.
This terminal Phone Number. Dependent upon the system telephone interconnect, it may be
necessary for a subscriber terminal to have a separate telephone number and not use its ISSI. This
field displays the subscriber phone number, it is also possible to view this number via the menu
functionality. The subscriber can change the number without modifying the phone number in the
system. Up to 24 digits can be entered.
This Radio Private Number. Displays the subscriber private number. This is an 8 digit number that
can be changed by the subscriber without modifying the phone number held in the system.
Last Modification Date. This non-editable field displays the date and time that the active Codeplug
was last programmed. The CPS automatically updates this data every time the Codeplug is saved,
or programmed into the terminal.
Programming Source. This non-editable field displays the source that was last used to program
the active Codeplug. This may be: Factory, CPS, OTAP, or Other. The CPS automatically updates
this data every time the Codeplug is saved or programmed into the terminal.
Comment. Comments can be entered about the last programming session and will be stored in the
Codeplug. Enter the information, up to 59 characters, before writing the Codeplug to the terminal.
To Next Page
Loading...
