Audio Parameters 3-87
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
The levels can be set in the range of 0 to 31 and the defaults are as shown above.
Note: The minimum value must be less than the maximum value. The maximum value must be
greater than the minimum value.
Included Fields:
Loudspeaker - Displays the volume range of the alert tone heard in the external speaker.
Handset - Displays the volume range of the speech heard in the handset.
Alert Tone - Displays the volume range of the alert tone heard.
Ring Tone - Displays the volume range of the ringing heard when a telephone call arrives.
Key Click - Displays the volume range of the sound when the user presses a key.
22.5 Mic Settings
These options are used to control of the microphone gain for the front microphone (Standard Mic &
Handset) and an external microphone connected via the accessory connector.
22.5.1 Standard Mic / Handset Gain
Allows adjustment of the microphone gain for the Standard Mic or the Handset connected to the
front microphone connector of the control head.
The range for this is -0 to 31 and the default is 16.
Note: Please deviate from the default value only if absolutely necessary. Optimum radio perfor-
mance is only provided with the delivered default settings.
22.5.2 External Mic Input Gain
Allows adjustment of the microphone gain for the external microphone input at the accessory
connector.
The range for this is -0 to 31 and the default is 20.
Note: Please deviate from the default value only if absolutely necessary. Optimum radio perfor-
mance is only provided with the delivered default settings.
To Next Page
Loading...
