MTM800 - Motorcycle Control Head 1-7
September 2008
Chapter 1 - MTM800 Product Information Manual 6866537D87-F
4.2 Display Icons
Amber - Solid Transmit Inhibit Active (TXI) /
Channel Busy in DMO
Amber - Blinking Incoming Call
No Indication Terminal Powered Down
Display
Icon
Description
Trunked Mode Operation
Signal Strength (TMO)
Allows you to check signal strength. More bars indicate a stronger signal.
Priority Scan
Indicates priority scanning is activated in the MTM800.
Data Connected
Displayed when the MTM800 is successfully connected to an external
device and ready for data transfer.
Data Transmit/Receive
Displayed when the MTM800 is transferring data to/receiving data from the
external device (laptop or desktop PC).
Direct Mode Operation
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTM800 is in Direct mode.
DMO Gateway
Indicates that gateway is selected. The icon has three states:
Solid — while the MTM800 is synchronised with the gateway.
Blinking — while the MTM800 is not synchronised or during attachment.
No icon — during a terminal to terminal and repeater call.
DMO Repeater
Displayed when the repeater option in DMO is selected. This icon has three
states:
Solid — while the terminal has detected the repeater (i.e., when the
terminal receives a presence signal).
Blinking — while the terminal has not detected the repeater or during
attachment.
No icon — during a terminal to terminal and gateway call.
General Icons
Unread Message
Indicates that you have unread messages in your Inbox.
Indication Terminal Status
To Next Page
Loading...
