3-4 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
There are 2 sub menus associated with the File Menu. The first is shown above and is displayed
when no terminal codeplug has been read, or loaded from archive. The options are:
3.2.1 Open
This option allows the user to select a previously archived codeplug.
1. In the File Open dialogue box, navigate to the drive and folder (or directory) where the code-
plug file is located.
2. Then double-click the desired file name, or highlight the file name and click OK to complete
the task. The codeplug contents will then be displayed in the CPS.
3. If the codeplug file is password protected, the CPS will display the password prompt to allow
the correct password to be entered and the file to be opened.
3.2.2 Read Phone
Selecting this option will cause the CPS to read the codeplug of the connected terminal.
To Next Page
Loading...
