Buttons, Keys and Accessories 3-117
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
28.1.2 Ring Source
The available options with this feature defines where the ring tones will be heard, either from the
accessory or from the terminal’s internal loudspeaker:
•In Radio
• In Accessory
28.1.3 Tones Path Selection for PHF Accessory in Idle Mode
This feature is used to select the active speaker for tone alerts.
The options are
• INT Speaker
• PHF Earpiece (external speaker).
To select an option, put the pointer into the field value, click on the arrow, and drag the pointer to the
desired option.
28.1.4 Telephone Handset Enable External Speaker on Hook for Group Mode
If the feature is enabled, the terminal switches the audio to an external speaker in Group mode
when the telephone handset (GMUN1006) is placed on hook and it disables the operation of the
high/low audio softkey whilst the telephone handset is on hook.
This feature only works when a telephone handset is installed/selected.
Select if the feature is disabled, or when enabled, if the Handset is connected via a junction box or
directly plugged into the control head.
28.2 One-Touch Options
This menu is used to set the button/key functionality and it has the following options:
28.2.1 One Touch Keypad Keypress Timer
The entry in this field sets the time duration that a Keypad Button must remain pressed before the
one-touch functionality is activated.
It has a range of 1000 to 5000 msecs, the default being 1000 msecs.
To Next Page
Loading...
