1-4 Product Overview
6866537D87-F Chapter 1 - MTM800 Product Information Manual September 2008
3.1 LED Indications
These are a visual indication of the operational state of the terminal.
3.2 Display Icons
Indication Terminal Status
Green - Solid In Use
Green - Blinking In Service
Red - Solid Out of Service
Red - Blinking Connecting to Network / Entering DMO
Amber - Solid Transmit Inhibit Active (TXI) / Channel Busy in DMO
Amber - Blinking Incoming Call
No Indication Terminal Powered Down
Display Icon Description
Trunked Mode Operation
Signal Strength (TMO)
Allows you to check signal strength. More bars indicate a stronger
signal.
Priority Scan
Indicates priority scanning is activated in the MTM800.
Data Connected
Displayed when the MTM800 is successfully connected to an
external device and ready for data transfer.
Data Transmit/Receive
Displayed when the MTM800 is transferring data to/receiving data
from the external device (laptop or desktop PC).
Direct Mode Operation
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTM800 is in Direct mode.
DMO Gateway
Indicates that gateway is selected. The icon has three states:
Solid — while the MTM800 is synchronised with the gateway.
Blinking — while the MTM800 is not synchronised or during
attachment.
No icon — during a terminal to terminal and repeater call.
To Next Page
Loading...
