MTM800 - Standard Control Head 1-5
September 2008
Chapter 1 - MTM800 Product Information Manual 6866537D87-F
3.3 Supported Languages
The following languages are supported by the terminal:
• English, German, French, Spanish, Dutch, Swedish, Russian (Cyrillic)
• Local language - User definable language set via CPS *)
It is also possible for the terminal text messages to be changed to some another language,
supported by ISO 8859-1 characters, during programming.
DMO Repeater
Displayed when the repeater option in DMO is selected. This icon
has three states:
Solid — while the terminal has detected the repeater (i.e., when the
terminal receives a presence signal).
Blinking — while the terminal has not detected the repeater or
during attachment.
No icon — during a terminal to terminal and gateway call.
General Icons
Unread Message
Indicates that you have unread messages in your Inbox.
New Message Has Arrived
Your Inbox could not open due to an on-going activity. The icon
remains to remind you of new messages in your Inbox.
Emergency
Appears while the MTM800 is in Emergency mode.
End-to-End encryption (E2E)
Solid
— E2E encryption mode is On
• for the selected talkgroup,
• for the highlighted talkgroup in the talkgroup list,
• for the highlighted private number,
• for the manually entered private number,
• when transmitting voice in Group Calls,
• when transmitting voice in half-duplex Private Calls.
Blinking
— E2E encryption mode is On
• when receiving voice in Group Calls,
• when receiving voice in half-duplex Private Calls,
• during encrypted full-duplex Private Calls.
No Icon
— Icon is cleared
• when E2E encryption mode of the call, highlighted group or
private number is Off.
Display Icon Description
To Next Page
Loading...
