3-10 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
4.3 Save
If the code plug is already stored in the data folder, then selecting the save option will save changes
that are made to the code plug file on the work screen in the stored file. The CPS will then offer
password protection for the stored file.
4.4 Save As
This option is used for storing files for the first, or for keeping a record of successive changes made
to a code plug. Selecting one of the five icons on the left of the screen will change the heading in the
‘Save in’ line to that of the selected icon, selecting the down arrow at the end of the ‘Save in’ line will
give all available computer options. The three icons to the right of the ‘Save in’ line are standard
Windows
®
options, go up one level, create new folder and view menu options.
4.5 Read Phone
Selecting this option will cause the CPS to read the code plug of the connected terminal.
During this process the CPS will establish communications with the terminal (Initializing), verify the
codeplug is compatible and read it for display in the CPS window work area.
To Next Page
Loading...
Need help?
General
