Motorola MTM800 - 18.2.15 Default TMO TG for Emergency DMO to TMO; 18.3 Scanning Parameters; 18.3.1 Active List; 18.3.2 Scan Status

3-66 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
18.2.15 Default TMO TG for Emergency DMO to TMO
This parameter is a reference to one entry in the TMO talk-groups table.
It specifies the TMO group that the radio will select whenever it enters emergency in DMO.
18.3 Scanning Parameters
This menu has 12 options some of which are dependent on other programmable fields.
Related fields are:
Paragraph 14.16 "Talkgroup Scan"
Paragraph 24.1.3 "TMO Scan Lists"
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3.12 "TMO Talkgroup Scan"
18.3.1 Active List
This option is dependent upon the scan list(s) being populated, otherwise the down arrow in the
Field Value box will not display. If a scan list is displayed in this field, the user is able to enable/
disable scanning via the terminal’s menu functionality.
18.3.2 Scan Status
Selecting this option will enable Talkgroup Scanning and is dependent on there being an entry in the
Active List.
18.3.3 User List Editing
If this option is enabled, the user is able to add or delete talkgroups from scan lists via the terminal’s
menu functionality.
18.3.4 Priority Editing Enabled
If this feature is enabled, the user is able to edit the priorities of the talkgroups in the scan lists.
The available options are:
18.3.5 PTT Operation
There are 2 options for this field value and are selected by clicking the pointer in the field value box
and selecting an option. The options defines the PTT operational functionality during scan.
If Talkback has been selected and the terminal ‘lands on’ a talkgroup in the scan list, the user is able
to take an active part (PTT).
If the Selected Only option is chosen and the terminal ‘lands on’ a talkgroup in the scan list, the user
is only able to listen. PTT is only available on the talkgroup selected via the Talkgroup Select button/
terminal menu functionality.
18.3.6 Presentation Mode
There are 2 options for this field value and are selected by clicking the pointer in the field value box
and selecting an option. These options define how received calls, from the selected talkgroup or
from the associated ATG, will be presented to the user during an on going call.