3-20 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
The binocular icons are used for selection purposes. To display an icon’s function, place the pointer
over the icon.
6.1.4 Bookmarks
This is used to display the Book Mark icon options on the tool bar.
6.1.5 Navigation
This is used to display the Forward, Previous, Next and Back navigation buttons on the tool bar.
6.2 Work Book
The workbook is located at the bottom of the document window and displays the name of the open
codeplug file and can be toggled on/off.
The Work Book menu has the following 2 options:
• View Mode
• Toggle Icons
6.2.1 View Mode
Selecting this option will display a terminal’s serial number at the bottom left of the window and is
used in conjunction with the Toggle Icons option.
6.2.2 Toggle Icons
This option is used with the View Mode option. If multiple codeplugs are on the work screen the user
is able to toggle between codeplugs by simply selecting the required codeplug from the bottom of
the screen.
To Next Page
Loading...
