Ergonomic Parameters 3-79
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
20.2 Tones
There are 8 available options in this sub menu when the CPS is opened with the ‘Admin Login’.
The tones relate to specific terminal actions undertaken as part of the MMI.
20.2.1 Clear to Send Tone
If enabled, the called terminal(s) will hear a short beep during a Group Call (Express Group Call) or
a Private Call (Express Connect Call) when the user releases the PTT.
This feature is Enabled/Disabled by clicking in the check box.
20.2.2 Periodic Tone
If enabled, the terminal will sound a tone periodically when in a non-operational state i.e. no service.
This feature is Enabled/Disabled by clicking in the check box.
20.2.3 Inactivity Revert Mode
If enabled, the terminal will revert to its power-up default mode when the Long Key Inactivity Timer
expires, (The Long Key Inactivity Timer defines the time duration of no user input/activity, i.e. a
button press).
If disabled, it remains in the same mode, only removing all sub-modes.
To Enable the Inactivity Revert mode, click in the check box.
20.2.4 DTMF
If enabled, the keypad will change from an alphanumeric keypad to a DTMF keypad when the
terminal is in either Phone or PABX mode. The user is then able to send DTMF tones, an option
required for over dialing.
This feature is Enabled/Disabled by clicking in the check box.
20.2.5 Keypad Lock Options
Enables the user to lock some, all, or none of the phone keys.
The options are selected using a drag-down menu. The menu options are:
• PTT Locked
To Next Page
Loading...
