Buttons, Keys and Accessories 3-121
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
28.3.6 Sending Predefined Message
This function sends a predefined message to the address that is already stored in the codeplug.
Related field:
Paragraph 26.1.2 "Outgoing Mail List"
Note: Sending Predefined Message is only available if the appropriate values are set in the Outgo-
ing Mail List.
28.3.7 Sending User Defined Message
This function sends a user defined message to the address that is already stored in the codeplug.
The user will be asked for a target selection if Send To is set to 0.
Related field:
Paragraph 26.1.2 "Outgoing Mail List"
Note: Sending User Defined Message is only available if the appropriate values are set in the Out-
going Mail List.
28.3.8 Hi/Lo Audio
This function changes the speaker between Speaker: On/Speaker: Off.
To Next Page
Loading...
