3-14 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
4.10.1 User Data
This option is used to save user data to a file by bringing up the Save dialogue box.
Select the types of data to be saved and click the Save button. If no types are selected, the save
button is disabled and the file will not be saved, otherwise specify the desired file name, hard drive
and directory location and click OK.
Notes:
• Make sure the call lists have entries in them before exporting the data. Otherwise, the user
data file will be empty.
• If a user extension is not provide to the file name, the application will automatically add this
file name extension when it saves the file.
• Use the Export and Import User Data functions when several terminals are required to have
the same Call List data.
4.10.2 User Report
This is used to generate a customised user report of codeplug data. The customised report is saved
as an *.html file.
4.10.3 Screen Saver
This feature is not supported for the terminal model MTM800 with standard and motorcycle control
head.
4.11 Change Codeplug Password
If the codeplug is protected by a password, this menu enables the codeplug password to be
changed.
To prevent an unauthorised user from viewing or editing the codeplug file, it can be protected with a
password.
To set a codeplug file password:
1. If there is more than one open codeplug file, make the required codeplug file active by click-
ing on its title bar.
2. Select File/Change Codeplug Password. The following screen will pop up. Enter the pass-
To Next Page
Loading...
