TalkGroups 3-99
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
24.2.2.9 Key Group
This is an additional parameter to DMO talkgroups. It specifies the key group associated with the
destination address.
For each DMO group, when key grouping method is <K, E>, the available values that can be
selected are one of KGj (j=1…K) or NO_KG.
24.2.2.10 Incoming Call Minimum Security Class
Specifies the minimum security class for call reception.
• Security Class 1 - no encryption applied.
• Security Class 2A - the DM-SDU and any related traffic are AI encrypted.
• Security Class 2B - the destination address (SSI), DM-SDU and any related traffic are AI
encrypted.
• Security Class 2C - PDU encrypted from destination address element and onwards except for
source address type element, and any related traffic are AI encrypted.
To change the setting, select the field value, and select desired setting.
24.2.2.11 Incoming Call Minimum Security Class
Specifies the minimum security class for call initiation.
See “Incoming Call Minimum Security Class” on page 99.
24.3 My Favorite Groups
This menu has the following two sub-menus:
24.3.1 List Options
This has the following options:
24.3.1.1 Name of List of Favorite Groups
A name or alias of up to 11 characters, used to identify this group range, is entered in the ‘Field
Value’ window.
24.3.1.2 Maximum Number of Talkgroups in “My Favorite Groups”
This option defines the number of entries allowed in this list, up to 128 entries can be specified.
To Next Page
Loading...
